Wedding Sound System Package C – Booth + Speakers + Uplights + Truss + Party Bar Lights

Equipment rental only. You or your DJ run the music. No DJ included.

This package includes the same sound and lighting setup as Wedding Sound System Package B and adds an all-in-one party bar DJ light kit on a stand above the booth.
You get a DJ style booth, two powered speakers, truss totems with uplights, colour-changing uplights at the base of the booth, and a compact party bar that adds movement and colour over the DJ area.

This setup is recommended for weddings and events of up to approximately 100 guests in a typical indoor or covered outdoor space.
Additional speakers can be added for larger rooms, and longer XLR cables are available to space speakers farther apart.

What’s Included

DJ Style Booth (White Front Panels)

Standing height workstation for laptop, phone, mixer, or small controller
White front panels hide cables and power bars from guest view
Folds down and stores in a carry bag
Approximate size: 44 in wide × 42 in high × 21 in deep

2 Colour Changing Uplights (Under Booth)

Placed at the base of the white front panels
Remote controlled
Multiple colour options and simple programs
Used to highlight the booth and match décor

2 Lighting Truss Totems (Approx. 9 ft)

Two vertical truss towers
Create a clean backdrop on each side of the booth
Provide structure for lighting and visuals

2 Uplights Inside the Truss Totems

Placed at the base of each truss facing upward
Colour changing with remote control
Light up the full height of each truss column

2 Powered Speakers on Tripod Stands

Approximately 500W bi-amplified speakers
Bluetooth connection for phone or laptop
AUX input for wired connection
Adjustable tripod stands

Party Bar DJ Light Kit with Stand

T-bar with multiple LED effects pre-mounted (wash, derby/moonflower, strobe style effects)
Height-adjustable tripod stand (up to approx. 6.5 ft)
Built-in auto and sound-active programs
Remote controlled for simple mode and colour changes
DMX compatible for advanced users (DMX cable not included)

XLR Linking Cable

Used to link both speakers together
Longer XLR cables available on request
Additional powered speakers can be added for wider coverage

Typical Uses

Wedding reception sound and lighting
DIY DJ setups with full backdrop and dance floor lighting
Playlist-driven receptions with added visual effect
Speeches, toasts, and first dances with a clean booth and lit background

Setup Instructions

1. Position the Booth

Place the booth where you want to control music and the microphone.
Set your laptop, phone, or tablet on the work surface.

2. Place Uplights Under the Booth

Set the two uplights at the base of the white front panels.
Use the remote to select colour or simple fade programs.

3. Set Up the Truss Totems and Truss Uplights

Place one truss totem on each side of the booth.
Place an uplight in the base of each truss facing upward.
Select colours to match the booth uplights or room décor.

4. Set Up the Party Bar Light Kit

Assemble and extend the tripod stand behind the booth.
Mount or position the party bar so it sits above and behind the booth.
Plug it into power and use the remote to choose auto or sound-active mode and preferred colours.

5. Set Up the Speakers

Place each speaker on a tripod stand.
Position one on each side of the booth (or further out if required).

6. Connect Your Music Source

Pair your phone or laptop directly to the main speaker.
Use this when speakers are set fairly close together.

Connect your device to the main speaker by Bluetooth or AUX.
Run the XLR cable from Mix Out on the main speaker to XLR In on the second speaker.
Adjust the second speaker volume using its volume or AUX input knob.

Connection Notes

Bluetooth linking between two speakers is reliable only up to about 8 feet.
Use the XLR cable if you want the speakers placed farther apart.
Wired connections are more stable for long events and larger rooms.

Power Requirements

Standard 110V power outlets required for speakers, booth lighting, truss uplights, and party bar
Extension cords are not included unless added to the order
Keep all equipment on a dry, stable surface

Outdoor Use

All equipment must be protected from rain and moisture
Not suitable for uncovered outdoor use in poor weather
Speakers and lighting should not be placed directly on wet ground

You Provide

Laptop, phone, or tablet with your music or playlists
Any DJ software or controller you choose to use (optional)
Your own music services (Spotify, Apple Music, etc.)
A person to operate the system and lighting during the event